2060 Automatic Sheet Metal Storage

Wanka supplies you with the 2060 Automatic Sheet Metal Storage, which integrates a three-dimensional storage structure, an intelligent electronic control system and fully automatic retrieval technology. It enables fully automated warehousing operations for metal and non-metal sheet materials throughout the process, supporting 24-hour continuous production operation. It can seamlessly connect with laser cutting, bending and other production lines as well as the digital management system of the factory, and is the core supporting equipment for the intelligent, low-carbon and standardized upgrade of large-sized sheet material processing workshops.

Product Core Definition and Core Value

1. Product Core Definition

Different from the simple shelves and ground stacking mode of traditional manual operations, 2060 Automatic Sheet Metal Storage is an integrated intelligent warehousing complete set of equipment specifically designed for 6000mm×2000mm large panel materials. Relying on automated transmission mechanisms and self-developed intelligent control systems, it realizes the entire process of automatic storage of sheet materials, layer-by-layer storage, precise retrieval, and rapid discharge automation. It is suitable for centralized storage of multiple types and thicknesses of sheet materials, and has superior versatility, intelligence, and adaptability compared to traditional warehousing equipment.

2. Core Pain Points of Traditional Warehousing

- Severe space waste: Utilizing only the flat ground space, the vertical layer height resources are idle, a large amount of production space is occupied by raw materials, and it is impossible to expand production and increase efficiency

- High material loss: Sheet materials are stacked and compressed, the ground is damp, and manual handling is collision, which easily causes scratches, deformation, rusting, and scrapping

- Low operation efficiency: Retrieval requires manual relocation and stacking, the process is cumbersome, and it is prone to causing laser production lines to stop waiting for materials

- Lack of management accuracy: There is no digital ledger, inventory counting takes a long time and has a large error, and material accumulation and repeated purchasing problems occur frequently

3. Core Implementation Value of the Equipment

- Space efficiency improvement: Vertical three-dimensional storage, the site utilization rate is increased by more than 80%, and the same storage capacity only requires 1/3 of the traditional warehousing space

- Cost reduction and quality improvement: Sheet materials are stored separately and independently in layers, from the source, problems such as compression, friction, and moisture are eliminated, and the scrap rate is significantly reduced

- Labor reduction and efficiency increase: One-click automatic storage and retrieval, a single person can be on duty, no need for full-time handling and inventory personnel, and the labor cost is significantly reduced

- Digital control: Automatically synchronize inventory data, support real-time query, automatic inventory, and data traceability, achieving refined management of warehousing

- Production line linkage: Connect with various sheet metal processing equipment, match the production rhythm of the assembly line.

FAQ

1. Q: What are the sheet metal storage specifications and materials that 2060 Automatic Sheet Metal Storage is compatible with?

A: It can accommodate the largest panels up to 6000mm × 2000mm, and is compatible with carbon steel, stainless steel, aluminum plates, galvanized plates, as well as wood, stone, plastic, and other non-metallic plates. It covers the storage needs of all industries.

2. Q: Compared to traditional storage, where does the core efficiency improvement lie?

A: The storage capacity is increased by 3-5 times, the single-time material retrieval time is shortened by over 75%, and it completely eliminates the need for manual stacking; automatic inventory replacement replaces manual reconciliation, the overall management efficiency of the warehouse is improved by 4 times, and it can operate continuously without interruption for 24 hours.

3. Q: Is the equipment operation threshold high? Can beginners quickly master it?

A: It is equipped with an extremely simple touch control visual interface, with functions triggered by one-click operation, and an emergency manual mode. Ordinary workers can operate independently after short-term training, and the manufacturer provides on-site training, video tutorials, and paper manuals, with zero technical threshold.

4. Q: How stable is the heavy-load operation? Will there be deformation or shaking?

A: The entire machine is made of thickened Q235 steel structure and welded as one, with multiple stress elimination and anti-corrosion treatments. A single layer can carry a load of 2-5 tons, which can be customized. It is equipped with multiple limiters and anti-blocking structures, and operates smoothly without deviation under full load, with a service life of up to 10 years.

5. Q: Does 2060 Automatic Sheet Metal Storage support non-standard customization and adapt to various workshop conditions?

A: It supports full-dimensional customization. The overall parameters of the equipment can be adjusted according to the building height and site size. Functions such as barcode scanning for storage, remote control, and automatic dust removal can be selected as needed, and it can adapt to different production needs of large and small factories.

6. Q: What are the contents of the delivery cycle and after-sales guarantee?

A: The standard model is completed within 7-10 working days, and on-site debugging can be completed within 2-3 days. Free installation training, whole machine warranty, lifetime maintenance services are provided. There is 24-hour online technical response, and free repair and replacement of non-human factors during the warranty period.

7. Q: Is the equipment energy consumption and later maintenance costs high?

A: It is equipped with energy-saving motors and intelligent start-stop systems, significantly reducing ineffective energy consumption, with a power saving rate of over 30%. The equipment has a low failure rate, only requiring routine cleaning, lubrication, and other basic maintenance, and the consumables are common and easily obtainable, with extremely low long-term maintenance costs.

Packaging and Logistics Delivery Specifications

- Modular Packaging for Separate Components

The main steel structure is wrapped with protective film and rainproof tarpaulin, with anti-collision guardrails added at the corners and reinforced with steel straps to prevent transportation damage, chipping, and deformation.

- Special Protection for Precision Components

Precision parts such as electronic control components, sensors, and touch screens are encapsulated in independent shockproof wooden boxes, protected against moisture and pressure, to avoid electrical failures.

- Classification and Storage of Small Items

Loose components like screws and sealing parts are packaged and labeled separately, accompanied by complete drawings, manuals, and warranty materials, to ensure no missing or incorrect installation.

- Special Packaging for Export

Export orders use fumigated wooden boxes that comply with international quarantine standards, accompanied by a complete set of customs clearance documents, suitable for humid and jolting conditions during ocean shipping.

- Precise Logistics Delivery

2060 Automatic Sheet Metal Storage uses dedicated vehicles for direct delivery, through dedicated trunk lines, with a dedicated person following the logistics process throughout, assisting with on-site acceptance upon arrival, to maximize the integrity of the equipment and delivery timeliness.