1560 Hand Pull Sheet Metal Storage

The 1560 Hand Pull Sheet Metal Storage produced by Wanka Factory features pure manual pulling mechanical transmission and does not require electricity. It optimizes the storage capacity, floor space and procurement cost. It specifically addresses the problems of large floor space for medium and long plates, cumbersome material retrieval, fragile plate surfaces and chaotic storage. This helps to upgrade factory storage to be standardized, low-carbon and low-cost.

Product Definition and Core Value

1. Product Positioning

- It lies between small and large heavy-duty sheet storage units, suitable for all specifications of industrial sheets ranging from 1.5 to 6 meters. It has strong versatility and wide adaptability.

- It features a modular pure mechanical structure, consisting of a base, frame, pull-out cabinet, hand-pulled drive mechanism, slide rails, and limit safety system. The structure is evenly stressed, and it is unlikely to loosen or shift over a long period of use.

- It does not rely on electricity. It is flexible in placement and suitable for old workshops, areas with incomplete power supply, and temporary processing sites for renovation.

2. Core Usage Value

- Revitalize the site and increase production capacity: Three-dimensional layered storage replaces flat ground stacking. The same storage capacity saves more than 60% of floor space, releasing workstation and passage space.

- Single-person efficient operation: The force-saving pull-hand structure eliminates the need for multiple people to stack, significantly improving the efficiency of material retrieval and reducing labor waste.

- Protect sheets and reduce losses: Layered independent storage eliminates compression, friction, and moisture damage from stacking, effectively protecting high-value sheets such as stainless steel, laminated materials, and alloys from damage.

- Low maintenance and long lifespan: There are no easily damaged electronic components such as motors and electrical controls. The failure rate is extremely low. Only simple cleaning and lubrication are required, and the standard service life can reach over 15 years.

- Enhance the factory image: The storage is organized and orderly, suitable for factory inspections, bidding, and business negotiations, bringing implicit commercial advantages.

Packaging and Shipping Standards

- Main Frame Packaging: Pearl cotton + corner protectors + stretch film + hard cardboard box, moisture-proof, dust-proof, and resistant to compression deformation.

- Pull-out Cabinet Packaging: Board surface coated with anti-scratch film + full coverage with soft foam cotton + isolation partitions, eliminating scratches, bumps, and paint peeling.

- Precision Components Packaging: Gears, chains, screws and other components are classified and sealed in bags, labeled, and stored in compartmentalized boxes, preventing loss, moisture, and deformation.

- Supporting Documents: Accompanying the goods are certificates of conformity, quality inspection reports, instructions, and after-sales agreements, meeting the requirements for acceptance, ledger, and bidding.

- Domestic Logistics: Direct express delivery, full vehicle delivery is optional. Fewer transfers and lower damage rate, full progress tracking throughout the process.

- Export Shipping by Sea: Fumigation of solid wood for reinforcement packaging, shock-proof, moisture-proof, and pressure-resistant, meeting customs and ocean transportation standards.

- Triple Verification: Before shipment, each item of parameters, configurations, accessories, and quantities is rechecked one by one to prevent wrong or missed shipments.

Environmental protection and sustainability advantages

- Green material selection: New national standard steel, no recycled waste materials, plastic powder has no heavy metals or toxic volatiles, steel can be recycled and regenerated, no difficult-to-degrade waste.

- Energy-saving and carbon reduction during production: Production waste is classified and recycled, wastewater is treated in a closed loop, and exhaust gas and dust are centrally treated. Compliance with clean production.

- Zero carbon operation: Pure mechanical manual structure, zero electricity usage, zero energy consumption, zero noise, zero exhaust gas emissions, suitable for green factory construction.

- Long-term recycling: Ultra-long service life, supports single-piece component replacement, no need for overall scrapping, significantly reduces resource consumption for equipment iterations.

- Assist in enterprise emission reduction: Reduces sheet material scrap rate, reduces handling frequency, indirectly reduces waste treatment and exhaust gas emissions, suitable for green ratings and green project bids.

Applicable Industries and Scenarios

1. Core Adaptation Industries

- Laser Cutting Processing: This 1560 Hand Pull Sheet Metal Storage is suitable for high-frequency inbound and outbound operations of multiple types of 1.5-6-meter plates, reducing equipment waiting time for materials.

- Sheet Metal Processing: Suitable for old workshops without circuit modifications, with layered storage of plates to reduce bending rework.

- Stainless Steel/Decorative Plates: Protects high-requirement plate surfaces, eliminating scratches, rust, and scrapping.

- Sheet Metal Trading: Clear classification, efficient inventory sorting, reduces wrong orders and omissions, and enhances delivery experience.

- Steel Structure Processing: Heavy-duty version suitable for stable storage of thick and medium-length plates.

2. Adaptation Work Conditions Scenarios

- Standard indoor workshops, old renovation factory areas, narrow and compact workshops, and utilization of corner spaces.

- Semi-open/Temporary sites (customized rainproof and corrosion-resistant versions can be adapted).

3. Industry SEO Tags

Medium-sized Plate Storage, Hand-Pulled Plate Warehouse, 6-meter Plate Storage Shelf, Vertical Storage Equipment, Low-Carbon and Electricity-Free Storage, Laser-Specific Plate Shelf, Expandable and Economical Industrial Shelf

Real user reviews

- Jiangsu Laser Factory: This 1560 Hand Pull Sheet Metal Storage solves the problem of large space occupation by 6-meter plates and the difficulty of manual stacking and unstacking. It releases 60% or more of the space, has high efficiency for single-person material retrieval, significantly reduces plate loss, and the equipment runs smoothly without any jamming during long-term operation.

- Shandong Sheet Metal Factory: It is suitable for old and restricted workshops with limited electrical capacity. It is purely mechanical and safe with no hidden dangers. The steel is thick and has stable load-bearing capacity. It is easy to install independently and provides prompt after-sales support.

- Guangdong Decorative Sheet Metal Enterprise: The coated and aluminum plates are completely free from scratches and dents, improving the quality rate, enhancing the cleanliness of the warehouse, and providing a better visual experience for customers during factory inspections.

- Zhejiang Steel Structure Factory: The heavy-duty version has stable load-bearing capacity without sagging. It has good anti-corrosion and rust prevention effects in humid environments and supports later layer addition and renovation. It is cost-effective and convenient.

- Southeast Asian Overseas Customers: It is suitable for local unstable electricity, high labor costs, and hot and humid working conditions. It occupies less space, is easy to operate, is resistant to aging, and has a high repeat purchase rate.